what is SDF files?

Standard Delay Format (SDF) is an IEEE standard for the representation and interpretation of timing data for use at any stage of an electronic design process. It finds wide applicability in design flows, and forms an efficient bridge between dynamic timing verification and static timing analysis.

It was originally developed as an OVI standard, and later modified into the IEEE format. Technically only the SDF version 4.0 onwards are IEEE formats.

It is an ASCII format that is represented in a tool and language independent way and includes path delays, timing constraint values, interconnect delays and high level technology parameters.

It has usually two sections: one for interconnect delays and the other for cell delays.

SDF format can be used for back-annotation as well as forward-annotation.

The Standard Delay Format (SDF) file stores the timing data generated by

EDA tools for use at any stage in the design process. The data in the SDF

file is represented in a tool-independent way and can include

•  Delays: module path, device, interconnect, and port
•  Timing checks: setup, hold, recovery, removal, skew, width, period, and nochange
•  Timing constraints: path, skew, period, sum, and diff
•  Timing environment: intended operating timing environment
•  Incremental and absolute delays
•  Conditional and unconditional module path delays and timing checks
•  Design/instance-specific or type/library-specific data
•  Scaling, environmental, and technology parameters

Throughout a design process, you can use several different SDF files. Some of these files can contain pre-layout timing data. Others can contain path constraint or post-layout timing data. The name of each SDF file is determined by the EDA tool. There are no conventions for naming SDF files.